Applicable LEED Credits:

Materials & Resources (MR) Credit 1.2 - Building Reuse - Maintain Existing Interior Non-Structural Elements

Extend the lifecycle of existing building stock, conserve resources, retain cultural resources, reduce waste and reduce environmental impacts of new buildings as they relate to materials manufacturing and transport. The longevity and durability of openings created with products from ASSA ABLOY Group brands should allow re-use on LEED projects and help in the attainment of this credit.

BARON - CECO DOOR - CURRIES - GRAHAM - MAIMAN - SMP SPECIALTY DOORS

Materials & Resources (MR) Credit 4 - Recycled Content

Increase demand for building products that incorporate recycled content materials, thereby reducing impacts resulting from extraction and processing of virgin materials. Use materials with recycled content such that the sum of post consumer recycled content plus 1/2 of the preconsumer content constitutes at least 10% or 20%, based on cost, of the total value of the materials in the project. The recycled content value of a material assembly is determined by weight. The recycled fraction of the assembly is then multiplied by the cost of assembly to determine the recycled content value. Almost all products from ASSA ABLOY Group brands contain recycled content and contribute toward this credit.

ADAMS RITE- BARON - CECO DOOR - CORBIN RUSSWIN - CURRIES - GRAHAM - HES - MAIMAN - MARKAR - McKINNEY - MEDECO - NORTON - PEMKO - RIXSON - ROCKWOOD - SARGENT - SECURITRON - SMP SPECIALTY DOORS - YALE

Materials & Resources (MR) Credit 5 - Regional Material

Increase demand for building materials and products that are extracted and manufactured within the region, thereby supporting the use of indigenous resources and reducing the environmental impacts resulting from transportation. Use building materials or products that have been extracted, harvested or recovered, as well as manufactured, within 500 miles of the project site for a minimum of 10% or 20%, based on cost, of the total materials value. Manufacturing facilities for ASSA ABLOY Group brands are located throughout North America and can assist your projects in earning this credit.

ADAMS RITE - BARON - CECO DOOR - CORBIN RUSSWIN - CURRIES - GRAHAM - HES - MAIMAN - MARKAR - McKINNEY - MEDECO - NORTON - PEMKO - RIXSON - ROCKWOOD - SARGENT - SECURITRON - SMP SPECIALTY DOORS - YALE

Materials & Resources (MR) Credit 6 - Rapidly Renewble Materials

Reduce the use and depletion of finite raw materials and long-cycle renewable materials by replacing them with rapidly renewable materials. Use rapidly renewable building materials and products for 2.5% of the total value of all building materials and products used in the project, based on cost. Rapidly renewable building materials and products are made from plants that are typically harvested within a 10-year or shorter cycle. GRAHAM and MAIMAN offer an agrifiber core made of wheat stalks that can help projects qualify for this credit.

GRAHAM - MAIMAN

Materials & Resources (MR) Credit 7 - Certified Wood

Encourage environmentally responsible forest management. Use a minimum of 50% (based on cost) of wood-based materials and products. These components include at a minimum, structural framing and general dimensional framing, flooring, sub-flooring, wood doors and finishes.

GRAHAM - MAIMAN

Indoor Environmental Quality (IEQ) Credit 4.1 & 4.2 - Low-Emitting Materials: Adhesives & Sealants, Paints & Coatings

Reduce the quantity of indoor air contaminants that are odorous, irritating and/or harmful to the comfort and well-being of installers and occupants. This credit only applies to materials applied within the weatherproofing system. ASSA ABLOY Group brands, however, offer solutions including pre-finished door openings and pre-installed glazing. This allows LEED projects to avoid applying materials onsite.

ADAMS RITE - BARON - CECO DOOR - CORBIN RUSSWIN - CURRIES - GRAHAM - HES - MAIMAN - MARKAR - McKINNEY - MEDECO - NORTON - PEMKO - RIXSON - ROCKWOOD - SARGENT - SECURITRON - SMP SPECIALTY DOORS - YALE

 

Indoor Environmental Quality (IEQ) Credit 4.4 - Low-Emitting Materials: Composite Wood & Agrifiber Products

Reduce the quantity of indoor air contaminants that are odorous, irritating and/or harmful to the comfort and well-being of installers and occupants. Composite wood and agrifiber products used on the interior of the building (i.e., inside the weatherproofing system) must contain no added urea-formaldehyde (NAUF) resins. GRAHAM and MAIMAN have NAUF and CARB 1 & 2 certified products available across their product lines.

GRAHAM - MAIMAN

Indoor Environmental Quality (IEQ) Credit 8.1 & 8.2 - Daylights & Views

Provide building occupants with a connection between indoor spaces and the outdoors through the introduction of daylight and views into the regularly occupied areas of the building. Adding glazing and sidelights to openings built with products from ASSA ABLOY Group brands will assist projects in achieving this LEED credit.

BARON - CECO DOOR - CURRIES - GRAHAM - MAIMAN - PEMKO - SMP SPECIALTY DOORS

LEED for Schools Specific Credits

Indoor Environmental Quality (IEQ) Credit 9- Enhanced Acoustical Performance

Provide classrooms that facilitates better teacher-to-student and student-to-student communications through effective acoustical design. Design the building shell, classroom partitions and other core learning space partitions to meet the Sound Transmission Class (STC) requirements of ANSI Standard S12.60-2002, Acoustical Performance Criteria, Design Requirements and Guidelines for Schools, except windows, which must meet an STC rating of at least 35. ASSA ABLOY offers a wide range of STC door solutions that meet ANSI Standard S12.20-2002 and can help LEED projects gain credit for Enhanced Acoustical Performance.

BARON - CECO DOOR - CORBIN RUSSWIN - CURRIES - GRAHAM - MAIMAN - McKINNEY - PEMKO -  SARGENT - SMP SPECIALTY DOORS - YALE

 

Indoor Environmental Quality (IEQ) Credit 10 - Mold Prevention

Reduce the potential presence of mold in schools through preventive design and construction measures. ASSA ABLOY Group brands offer MicroShield® anti-microbial coatings. This natural anti-microbial coating can be applied to doors and hardware and act as an additional preventative measure to assist school projects in achieving this credit.

ADAMS RITE - BARON - CECO DOOR - CORBIN RUSSWIN - CURRIES - GRAHAM - MAIMAN - MARKAR - McKINNEY - MEDECO - NORTON - PEMKO - RIXSON - ROCKWOOD -SARGENT - SECURITRON - SMP SPECIALTY DOORS - YALE

LEED EBOM Specific Credits

Materials & Resources Credit 3 - Sustainable Purchasing: Facility Alterations & Additions

Reduce the environmental and air quality impacts of the materials acquired for use in the upgrade of buildings. Maintain a sustainable purchasing program covering materials for facility renovations, demolitions, refits and new construction additions. Products from ASSA ABLOY Group brands can help sustainable purchasing programs meet many of the requirements to obtain this credit.

ADAMS RITE - BARON - CECO DOOR - CORBIN RUSSWIN - CURRIES - GRAHAM - HES - MAIMAN - MARKAR - McKINNEY - MEDECO - NORTON - PEMKO - RIXSON - ROCKWOOD - SARGENT - SECURITRON - SMP SPECIALTY DOORS - YALE

 

Materials & Resources Credit 9 - Solid Waste Management: Facility Alterations & Additions

Divert construction and demolition debris from disposal to landfills and incineration facilities. Redirect recyclable recovered resources back to the manufacturing process and reusable materials to appropriate sites. Many products from ASSA ABLOY Group brands can be recycled (in the case of steel products, potentially infinitely) and reused. We strive to make durable sustainable products that can assist projects in attaining this credit.

ADAMS RITE - BARON - CECO DOOR - CORBIN RUSSWIN - CURRIES - GRAHAM - HES - MAIMAN - MARKAR - McKINNEY - MEDECO - NORTON - PEMKO - RIXSON - ROCKWOOD - SARGENT - SECURITRON - SMP SPECIALTY DOORS - YALE

 

Ask us about our Graham FSC® Certified Products 

  

Ask us about our Maiman FSC® products